FAQ of Solar Pool Heating Heliocol Solar Pool heating System
Owning a HELIOCOL system means drastically reducing or even eliminating expensive pool heating utility bills. Year after year, the savings continue while you extend your swimming season. HELIOCOL solar pool heating is the most economical way to heat your pool. Zero operating costs, virtually no maintenance and the longest and most comprehensive warranty ensures the savings will continue for decades to come.
HELIOCOL solar heating systems are designed to heat your swimming pool using free heat from the sun. The HELIOCOL system should be in operation during the daytime when solar radiation can be absorbed. A HELIOCOL system equipped with an automatic controller turns on and off effortlessly whenever there is sufficient solar energy.
In some regions, the use of a solar heating system can lengthen your swim season to 12 months, while in other regions, HELIOCOL can drastically extend your swim season. Regardless of geographic region, you will enjoy months of additional fun in the pool without the added expenses associated with other fossil fuel heaters.
A properly installed solar heating system should require very little, or no, maintenance. Check your solar heating system for proper operation at the beginning of each swimming season, particularly if it has an automatic controller.
HELIOCOL SOLAR systems are currently heating pools in all weather conditions around the world. SOLAR systems provide year-round pool heating in warm climates and extend the swimming season in colder climates.
The patented individual tube design and mounting hardware can sustain 180 mph winds and are guaranteed with the most comprehensive warranty of any heater available.
As long as it is daytime, the SOLAR system absorbs solar radiation. Any solar radiation absorbed by the HELIOCOL system is then transferred into the pool water. Therefore, even in cloudy conditions, the HELIOCOL SOLAR system will
heat your pool. It is important to note that increasing the number of solar panels in your system will help absorb more heat. As with any heater, using a pool blanket is advisable, as it will reduce heat loss.
Yes, the HELIOCOL SOLAR system works by circulating water through the solar panels using your existing pool pump. Therefore, your pump must be in operation for sufficient water to flow through the solar panels.
The HELIOCOL SOLAR system is guaranteed not to discolor your pool due to deterioration of the solar panel material. OUR panels are made of polypropylene with special ultraviolet inhibitor additives. Other manufacturers use cheaper grade plastics like EPDM or pure polypropylene, which are known to corrode and discolor pool water.
Some of our customers choose to use their solar heating system in conjunction with an existing pool heater. The solar heating system is designed to serve as the primary heat source for your pool water, while your existing pool heater serves as an auxiliary, or backup, heater. By using a solar heating system as your primary heat source, you can lengthen the life of your existing pool heater while minimizing the utility bills associated with heating your pool.
An automatic controller allows you to set your desired pool temperature. When the desired temperature is reached, your SOLAR system will automatically turn off to maintain the desired temperature.
In some climates, the swimming pool can naturally reach uncomfortable temperatures during peak summer months. The HELIOCOL SOLAR system can dissipate excess heat in the pool water by circulating the water through the collectors at night. (UNIQUE)
HELIOCOL solar collectors can be mounted on roofs or any area near the pool that provides the proper exposure, orientation and tilt toward the sun. Ideally, HELIOCOL solar collectors should face south. However, an orientation up to 45 degrees east or west of due south will not significantly decrease performance as long as shading is avoided. OUR systems can also be installed on the
Will a roof-mounted system harm my roof?
Individual tube design eliminates competitors’ cumbersome and unattractive straps, which can damage roof surfaces. Instead, OUR solar collectors are affixed with the patented Alligator Clamp, which minimizes or eliminates roof penetrations.
The area needed for solar collectors to heat your pool depends on many factors. Depending on the pool’s geographic location, roof orientation, pool configuration and your heating requirements, the surface area of a solar heating system can CALCULATED IN RESPECT of pool Location , Wind Speed, Vegetation , Sunlight, pool’s surface area AND TEMP RISE.
We recommend a trained installer complete all the installations.
While solar collectors are used around the world for heating swimming pool water, they are also used in many warm-climate countries to heat water for home use. Since SPECIAL solar collectors do not require glazing, insulation or metal components, they are much less expensive and lighter weight than other domestic hot water solar collectors. It is important to note however that POOL solar collectors are not suitable for use during freezing weather or in areas which mandate that only copper pipes carry potable water. Be sure to check your local plumbing codes to ensure that you are in compliance.
OUR solar collectors are designed to heat large volumes of water (thousands of gallons) to relatively low temperatures (under 95 degrees Fahrenheit) by circulating the water at a relatively fast rate through the collectors. Domestic hot water systems raise a small volume of water (less than one hundred gallons) to very high temperatures (139 degrees Fahrenheit) by circulating the water slowly through the collector. These two different solar technologies are meant for different applications. A domestic hot water system cannot sufficiently heat a large body of water such as a pool to comfortable temperatures while a POOL HEATING system cannot reach the very high temperatures needed for domestic use. In addition, domestic hot water systems are made of copper, STAINLESS STEEL which deteriorates quickly when in contact with the corrosive pool water. However, in some countries, POOL HEATING systems are used to ‘pre-heat’ domestic hot water. POOL solar collectors do not require glazing or insulation making them much cheaper and lightweight then domestic hot water panels.
Metal collectors are generally made of copper tubing mounted on an aluminum plate. The disadvantages of metal collectors are that they are more susceptible to corrosion and freeze damage, and the copper tubes may react with your pool’s chlorine if the pH level falls below 7.2. An abundance of copper ions in pool water may form dark-colored precipitates, which can coat the pool’s walls. Only draining, cleaning and repainting the pool can remove discoloration.
The greatest loss of heat from a pool occurs from its surface due to evaporation. By reducing this evaporation loss, solar pool covers or blankets are very effective in lengthening the swimming season. However, it is important to note that there is a key difference between HELIOCOL solar heating systems and solar pool blankets. A HELIOCOL heating system adds heat to your pool while a pool blanket helps to maintain the heat that already exists in the pool water. When used together, your pool water can be heated and maintained at your desired temperatures most efficiently.
No. POOL solar collectors heat your swimming pool water by sending water through individual Special Polymer tubes that transfer the sun’s energy to your pool water directly. POOL solar collectors are not designed to produce electricity.
HELIOCOL is the only solar collector manufacturer that grants a full 10 Year Parts and Labor Warranty (10 years outside the USA) on all of its manufacturer components. MANUFACTURER guarantees that all POOL solar collectors and components will be free from defect in materials and workmanship in the manufacturing process under normal use and service. During that time, should a solar collector or component exhibit a manufacturing defect, MANUFACTURER will repair or replace the part without charge for parts or labor to the customer. Solar collectors are also warranted against internal freezing, so as long as they have been installed according to installation guide.